居然发布了RouterOS v7.2rc1

12月21日，MikroTik同时发布了v7.1.1和v7.2rc1两个版本，我预计圣诞前肯定会更新7.1.1，但没想到会放出7.2rc1，按照这个情况7.1作为stable版本，7.2rc作为Testing测试版本，那铁定v6.49.2是v6最后一个版本！在官网v7也被提到了RouterOS版本第一的位置，v6排到下面去了。MikroTik人也想在2021年对v7做一个了断！

这个更新完了，就等明年看v7的表演了，提前祝大家2022年，新年快乐！

 

What’s new in 7.2rc1 (2021-Dec-17 21:54):

*) arm64 – improved low disk space handling condition on upgrade;
*) backup – added “force-v6-to-v7-configuration-upgrade” option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup – fixed automatic backup generation when resetting configuration;
*) bgp – do not export default BGP values;
*) bgp – improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth – allow to export device, advertiser and scanner configuration;
*) capsman – improved system stability when processing CAP packet by Mangle;
*) certificate – allow to choose digest algorithm for CSR signing;
*) certificate – made “fingerprint” parameter read-only;
*) chr – improved system stability when writing into memory;
*) chr – temporarily suspended downgrade to RouterOS v6;
*) console – fixed “print” command with additional “where” condition;
*) console – made “password” parameter mandatory when creating a new user;
*) console – properly erase CLI history after configuration reset;
*) crs3xx – fixed CPU load balancing for ARM dual core devices;
*) dhcp-server – fixed DHCP Option decimal value parsing;
*) dhcp-server – fixed statistics sending in “Accounting Stop” packets;
*) dhcp-server – send “Class” attribute in “Accounting Request” when provided by RADIUS;
*) dhcpv4-server – allow adding comments;
*) dhcpv4-server – reset dynamic “bcast” flag when receiving offer from DHCP relay;
*) dhcpv4-server – reset offer counter when receiving offer from DHCP relay;
*) ethernet – improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) graphing – properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot – fixed login page over HTTPS;
*) ipsec – added hardware acceleration support for CCR2116;
*) l3hw – fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw – fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw – fixed bonding source MAC address;
*) l3hw – improved system stability when using 7 or more VLAN interfaces;
*) lora – fixed “antenna-gain” parameter unit;
*) lte – added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte – expose diagnostics channel for all modems;
*) lte – fixed “monitor” command to not report old info;
*) lte – fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) ntp – print log change time with time-zone applied;
*) ospf – fixed distance if “originate-default” is set to “always”;
*) ospf – fixed neighbor stuck in ExStart;
*) ospf – fixed simple authentication;
*) ospf – improved logging;
*) ospf – improved overall stability;
*) ospf – improved stability for very large LSDB;
*) ospf – improved stability when DR goes down;
*) ospf – improves stability when handling looped back OSPF packets;
*) ovpn – added SHA2 authentication algorithm support;
*) ovpn – added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn – added option to send disconnect message in UDP mode;
*) ovpn – fixed large option message parsing;
*) poe – update PoE firmware only on devices that support it;
*) ppp – show local and remote IPv6 addresses (CLI only);
*) pppoe – added option to configure “host-uniq” parameter;
*) pppoe – added option to ignore PADI messages with empty service name;
*) pppoe – use default MTU of 1492;
*) pptp – added insecure connection warning;
*) queue – improved system stability when processing traffic;
*) route – fixed “min-prefix” configuration when set to 0;
*) route-filters – allow to filter and modify default route if “originate-default” is set to “always”;
*) route-filters – fixed possible address list race condition and memory leak;
*) socks – fixed SOCKS5 support;
*) ssh – fixed forwarding with IPv6 link-local addresses;
*) ssl – fixed CA certificate processing when “subjAltName” is marked as critical;
*) supout – added “port-controller” bridge section;
*) tr069-client – accept 200-299 codes for HTTP diagnostics;
*) tr069-client – added support for wireless client uptime reporting;
*) upgrade – improved 404 error handling when checking for new versions;
*) upgrade – improved downgrade prompt message;
*) user – removed obsolete “tikapp” policy;
*) user – send “Class” attribute in “Accounting Request” when provided by RADIUS;
*) webfig – fixed default configuration popup presence;
*) webfig – fixed user policy lookup for skin designer;
*) wifiwave2 – added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 – fixed calling “scan” and “frequency-scan” commands through the API;
*) winbox – added “Mode” parameter under “Wireless” menu with WifiWave2 package;
*) winbox – added “TLS Version” parameter for “Interface/OVPN”;
*) winbox – added “VRF” parameter for “SSH” and “Telnet” menus;
*) winbox – added interface list support for “IP/Traffic Flow” menu;
*) winbox – added local/remote CPU load parameters for “Bandwidth Test”;
*) winbox – added support for “Tool/Speedtest” menu;
*) winbox – added support for W60G align tool;
*) winbox – changed “Accept Redirects” parameter type under “IPv6/Settings” menu;
*) winbox – do not require “name” and “file name” parameters for certificate import/export;
*) winbox – do not show connection tracking table if it has more than 10000 entries;
*) winbox – fixed “Switch” menu on Chateau devices;
*) winbox – fixed “expires-after” certificate parameter value;
*) winbox – fixed address list type parameters in “Routing” menu;
*) winbox – fixed error message when adding NTH rule with “0” value;
*) winbox – fixed minor typo under “LTE” interface menu;
*) winbox – made “9” the default value for “Target” parameter under “IP/Traffic Flow” menu;
*) winbox – made “Routing Filters/Rules” table sortable;
*) winbox – moved “IP/Route/Nexthops” and “IPv6/Route/Nexthops” menus to “Routing/Nexthops”;
*) winbox – properly limit “Disconnect Timeout” value under “CAPsMAN/Configuration” menu;
*) winbox – properly update ethernet auto negotiation status on CHR;
*) winbox – renamed “Keep user configuration” to “Keep users” under “System/Reset Configuration” menu;
*) winbox – renamed “Revoked” parameter to “Revoked Time” under “System/Certificates” menu;
*) winbox – report local terminal session as “local” instead of “telnet”;
*) winbox – require existing pool for “Address Pool” parameter under “IPv6/DHCP Server” menu;
*) winbox – require non empty “Packet Mark” value under “Queues” menu;
*) winbox – show “Lost Ratio” column by default under “Tools/Traffic Generator” menu;
*) winbox – show “Routes” column by default under “PPP/Secrets” menu;
*) winbox – show additional columns by default for “Wireless” menu with WifiWave2 package;
*) winbox – updated default “Routing/BGP/Peer Cache” table appearance;
*) winbox – use “total” as default value for “Tools/Profile”;
*) wireguard – fixed IPv6 LL address generation;
*) wireguard – made “preshared-key” and “private-key” values sensitive;
*) wireless – added information about client signal strength to log messages about disconnections;
*) wireless – fixed frequency range information for IPQ4019 interfaces;
*) zerotier – properly handle IP address change;